Coolant Level; Coolant Type; Checking And Adding Coolant In Expansion Tank - EBR 1190 SX Owner's Manual

COOLANT LEVEL

Coolant Type

CAUTION
Use only high quality extended life antifreeze and coolant.
Use of other coolants/mixtures may lead to engine damage.
The antifreeze & coolant needs to be a 50-50 mixture of de-
ionized water and Ethylene Glycol-based Anti-freeze.
CAUTION
De-Ionized water must be used with the antifreeze in the
cooling system. Hard water can cause scale accumulation in
water passages which reduces cooling system efficiency,
leading to overheating and engine damage.

Checking and Adding Coolant in Expansion Tank

The expansion tank is located under the right side fairing hear
the front fork. On the RX the COLD FILL level marking is
visible on the inside of the expansion tank by looking under
the headlamp, above the front fender and from the opposite
side of the motorcycle. On the SX it is visible on the right side
of the motorcycle from the front.
1. View the expansion tank. See Figure 52. The fluid
level should be at the marked level when cold.
2. To add coolant, unsnap the cap on the plastic
expansion tank and fill to the midpoint of the tank.
Figure 53. Cold Fill Line.
95