Chassis Lubrication - EBR 1190 SX Owner's Manual

Figure 42: Adjustment Measurement

CHASSIS LUBRICATION

Do not switch lubricant brands indiscriminately because some
lubricants interact chemically when mixed. Use of inferior
lubricants can damage the engine.
1. The steering head bearings are sealed, angular
contact bearings and do not require additional lubrication.
Check for smooth range of movement and proper operation.
2. Front and rear wheel bearings are sealed and do not
require additional lubrication. Check at every tire change
(more often in adverse conditions) or yearly if operated under
winter conditions. Replace bearing spacers if they show any
wear or distortion.
3. Inspect throttle control grip, throttle control cables,
brake controls, clutch controls, fuel filler cap, ignition switch
and sidestand every 6200 miles (10,000 km). Check for a
smooth range of movement and proper operation. See an
EBR Dealer for service as required.
4. Rear swingarm pivot bearings are sealed and do not
require additional lubrication. Check for smooth range of
movement and proper operation. See an EBR Dealer for
service as required.
92
CAUTION