Engine Off/Run Switch; Throttle Control Grip - EBR 1190 SX Owner's Manual

ON. See OPERATION, Starting the Engine: EBR 1190 RX/SX
for operation procedures.

Engine OFF/RUN Switch

See Figure 7. The engine OFF/RUN switch turns the ignition
power on or off. The engine OFF/RUN switch is located on the
right hand controls. Push the top portion of the engine
OFF/RUN switch to turn off ignition power and shut the engine
off. Push the bottom portion of the engine OFF/RUN switch to
turn on ignition power.
NOTES
-The Engine OFF/RUN switch must be in the RUN position to
start or operate the engine.
-The Engine OFF/RUN switch should be used to shut the
engine off.
1. To shut the engine off, push the top of the OFF/ RUN
switch to the ignition OFF position.
2. See Figure 5. Turn the ignition/headlamp key switch
counterclockwise to the OFF position to turn the ignition
power completely off.

Throttle Control Grip

1. See Figure 7. The throttle control grip is located on
the right handlebar and is operated with the right hand. Turn
throttle control grip clockwise (toward the front of the vehicle)
to close the throttle and decelerate.
2. Turn the throttle control grip counterclockwise
(toward the rear of the vehicle) to open the throttle and
accelerate.
36