EBR 1190 SX Owner's Manual page 62

^
Do not spill fuel on the motorcycle while refueling.
Immediately wipe up fuel spills on your motorcycle. Fuel can
cause damage to cosmetic surfaces.
1 Verify fuel is present in tank and add fuel if required.
2. Adjust mirrors to proper riding conditions
3. Check coolant level. See MAINTENANCE AND
LUBRICATION, Coolant Level.
4. Verify oil is present in engine. Check oil level only
after warming up motorcycle. See MAINTENANCE AND
LUBRICATION, Oil Level
5. Check controls to make sure they operate properly.
Operate the front and rear brakes, throttle, clutch and shifter.
All controls should operate freely without binding.
6. Check steering for proper operation by turning the
handlebars through the full operating range. Handle-bars
should turn smoothly without binding.
^
WARNING
CAUTION
Be sure tires are properly inflated, balanced and have
adequate tread. Inspect your tires regularly and see an EBR
dealer for replacements. Riding with excessively worn,
unbalanced or under-inflated tires can adversely affect
stability and handling, which could result in death or serious
injury.
7. Check tire condition and pressure. Incorrect pressure
will result in poor riding characteristics and affect handling
and stability. See table 8 for correct tire pressures. See
MAINTENANCE AND LUBRICATION/TIRES/TIRE REPLACMENT.
8. Check all electrical equipment and switches including
the headlamp, stop lamp, turn signals and horn, for proper
operation.
NOTE
Check horn operation with engine running.
62