The electronic fuel injection system compensates for
atmospheric and engine conditions for starting. NO "choke" or
enrichener is needed. Do not twist the throttle prior to
engaging the starter.
See figure 22.
1.
Turn engine OFF/RUN switch to RUN.
2.
Be sure the throttle is closed.
3.
Raise the sidestand.
4.
Turn ignition/headlamp key switch to ON.
5.
Verify transmission is in NEUTRAL position by
observing lit green neutral indicator lamp on dash panel, and
verify neutral position by rolling motorcycle forward and
backward.
6.
Press electric starter switch to operate starter.
7.
Release electric starter switch when engine starts.
Figure 22.
NOTE
64