EBR 1190 SX Owner's Manual page 44

• Use the center (SEL) button to change a setting.
NOTE
The up and down triangles and the SEL images refer to the
buttons on the left edge of the case.
The top and bottom buttons(up and down triangles) allow you
to move from one area to another. The center button (SEL)
allows you to change the values.
Select EXIT to return to the MENU screen.
Units
See Figure 10. The Units screen allows you to select Units of
Measure appropriate for you area.
• Click the center button (SEL) to display the unit
settings.
• MPH/Fahrenheit/U.S. Gallons
• Km/H /Centigrade/Liters
• MPH/Centigrade/Imperial Gallons
Toggle up or down to the Units of Measure appropriate for
you area.
Select desired UOMs.
Select EXIT to return to MENU
Track Data
See Figure 10. Track data allows you to record lap times.
There are 10 sessions of 20 laps each that can be stored.
Three sessions can be locked. Locked sessions will not be
over written by new sessions.
To record lap times use the center button (SEL) to select
Track Data:
1. Use the top and bottom buttons to navigate up or
down to the LAP TIMER.
2. Use the center button (SEL) to turn the Lap Timer on
(white background/dark letters).
3. Select Exit to return to the Menu.
4. Exit back to the Main screen.
5. To start the timer depress the headlight flasher
button once
6. To stop one lap and immediately start another lap
briefly depress the headlight flasher.
44