Maintenance And Lubrication; Safe Operating Maintenance; Break-In Maintenance - EBR 1190 SX Owner's Manual

turn clockwise and rear rebound damping by turning 1/8 to
1/2 turn clockwise.

MAINTENANCE AND LUBRICATION

SAFE OPERATING MAINTENANCE

^
WARNING
Perform the service and maintenance operations as indicated
in the regular service interval table. Lack of regular
maintenance at the recommended intervals can affect the
safe operation of your motorcycle, which could result in death
or serious injury
Good maintenance creates a safe motorcycle. A careful check
of certain equipment must be made after periods of storage.
Also, frequently inspect the motorcycle between the regular
service intervals to determine if additional maintenance is
necessary.
Check the following items:
1. Tires for correct pressure, abrasion or cuts.
2. Drive chain for wear or damage.
3. Brakes, steering and throttle for responsiveness and
freedom from binding.
4. Brake fluid level and condition. Hydraulic lines and
fittings for leaks. Also check brake pads and discs for wear.
5. Cables for fraying or crimping and free operation.
6. Engine oil level.
7. Engine coolant level.
8. Clutch fluid level and condition. Hydraulic lines and
fittings for leaks.
9. Headlamp, tail lamp, brake lamp, and directional
lamp operation.

BREAK-IN MAINTENANCE

NOTE
New motorcycle initial service is required to keep your new
motorcycle warranty in force and make sure the emissions
system operates properly.
80