International HS 2.8L Service Manual page 92

International HS 2.8L
CRANKSHAFT GEAR
Removal
1. Remove distribution belt, see DISTRIBUTION
BELT - Removal.
2. Use tool nr. 8130628 if the crankshaft gear
cannot be manually removed.
3. Remove "o" ring.
4. If necessary remove oil seal from timing
housing.
Installation
1. Lubricate the new crankshaft oil seal with
clean engine oil.
2. With lip side forward, parallel install oil seal,
using tool nr. 8130637.
3. Lubricate a new sealing "o" ring with Vaseline
and position it on shaft, taking care to do not
damage it with the gibs.
4. Install crankshaft gear, until the total touch,
making sure "o" ring stay correctly seated.
Use tool nr. 8130637.
INTERNATIONAL ENGINES
8120081 - 05/02 - Service Manual
Engine Timing
9 1