International HS 2.8L Service Manual page 63

Cylinder Head
Clearances
Procedure
Note: Swinging is the moment when exhaust valve is closing and intake valve is opening. At
this situation, the piston of the respective cylinder will be at TDC. The piston nr. 1 is the
closest to the timing housing.
3. Assembly valves cover, correctly positioning
its sealing gasket with cylinder head. Tighten
fixation nuts within 8 to 11 Nm.
6 2
International HS 2.8L
Adjustment Intake
conditions valve
COLD ENGINE 0.20 mm
Balance valves of
cylinder nr.
4
2
1
3
INTERNATIONAL ENGINES
Service Manual - 8120081 - 05/02
Exhaust
valve
0.20 mm
Adjust valve of
cylinder nr.
1
3
4
2