International HS 2.8L Service Manual page 85

Crankshaft Pulley
CRANKSHAFT PULLEY
Removal
1. Drain coolant water.
2. Remove radiator upper hose.
3. Remove fan, see FAN -Removal
4. Remove moving belt, see ACCESSORIES
MOVING BELT - Removal.
5. Install tool nr. 8130638 in crankshaft pulley
and fix it with 4 bolts.
6. Remove crankshaft pulley fixation bolt, using
a lever of an appropriate length.
7. Remove pulley. If necessary, use extractor
nr. 8130628.
Reinstallation
1. Reinstall in inverse order, tightening fixation
bolt with 80 Nm + 125º.
TIMING HOUSING COVER
Removal
1. Remove crankshaft pulley, see
CRANKSHAFT PULLEY - REMOVAL
2. Remove 14 fixation bolts from timing housing
cover.
3. Remove cover with gasket.
Seal replacement
1. Remove used cover seal and clean housing
2. Support cover and install a new seal, open
side turned to the housing, using tool nr.
8130637.
8 4
International HS 2.8L
INTERNATIONAL ENGINES
Service Manual - 8120081 - 05/02