International HS 2.8L Service Manual page 32

Table of Contents

Advertisement

International HS 2.8L
LACK OF FUEL
1. Fill fuel tank with 3 liters minimum.
2. Open fuel filter upper plug and loosen the 4
nozzle nuts.
3. Crank engine until that fuel drips through the
filter upper plug and through the nozzle nuts
(approximately 10 seconds).
4. Close plug and tighten the high-pressure pipe
nuts.
5. Start and wait for 10 seconds to engine
stabilization.
6. If the engine doesn't start, repeat the
procedure starting from the item 2.
It is recommended to change the fuel filter.
Avoid the lack of fuel because it causes
serious damages to the fuel injection
system.
LIFT PUMP
Fuel lift pump has the function of transferring fuel
from fuel tank to fuel injection pump, passing
through the fuel filter.
Removal
1. Disconnect fuel lift pump inlet and outlet
pipes.
Note:
Close pipes ends and connections to avoid dust penetration.
2. Loosen fixation bolts and remove pump and
gasket.
INTERNATIONAL ENGINES
8120081 - 05/02 - Service Manual
Fuel System
3 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents