Accessories
VACUUM PUMP
Removal
Vacuum pump of turbocharged International
HS 2.8L Engines is attached to the alternator.
1. Remove alternator, see ALTERNATOR,
Removal.
2. If it is necessary to repair vacuum pump, it is
recommended to send the complete set
(alternator and vacuum pump) to Bosch
Network.
Warning:
By not execution this procedure,
the warranty will be canceled.
Installation
1. Install in the inverse order of the removal,
tighten bolts according to specification.
Air conditioning compressor
Removal
1. Remove compressor pulley belt tensor, see
ACCESSORIES MOVING BELTS - Removal
2. Disconnect cables from the rear part of the
compressor.
3. Remove piping from the rear part of the
compressor.
4. Remove upper support bolts.
5. Remove compressor fixation bolts to housing
support.
Reinstallation
1. Reinstall in the inverse order of the removal,
tighten bolts according to specification.
104
International HS 2.8L
INTERNATIONAL ENGINES
Service Manual - 8120081 - 05/02