Service Mode Operation; Destination Settings - Canon PIXMA iP6000D Service Manual

<Standalone printer operation>
1) Turn on the printer.
2) Press and hold the Resume/Cancel button until the LED blinks the specified number of times listed in the table below, and release it. The operation starts.
LED blinking
1 time Print head manual cleaning
2 times Nozzle check pattern printing
3 times Paper feed roller cleaning
4 times Automatic print head alignment
5 times Bottom plate cleaning
6 times Unspecified
7 times Set the widest head-to-paper distance
(6) Service mode
Function
Service test print
- Model name
- ROM version
- USB serial number
- Waste ink amount
- CD-R sensor correction
- LCD viewer language settings
EEPROM information print
EEPROM initialization
Waste ink counter reset

Destination settings

Button/LCD viewer test
Note: At the end of the service mode, press the Power button. At that time, the paper lifting plate of the sheet feeder unit will be raised.
1 - 13
Operation
Set a sheet of plain paper (A4 or letter) in the sheet feeder or the cassette
(according to the Paper Feed switch setting).
Set a sheet of plain paper (A4 or letter) in the sheet feeder.
Fold a sheet of plain paper (A4 or letter) in half crosswise, then unfold and set it
in the sheet feeder with the folded ridge facing down.
Procedures
See "Service mode operation procedures" below. Set a sheet of A4 or letter- sized paper.
See "Service mode operation procedures" below. Set a sheet of A4 or letter- sized paper.
See "Service mode operation procedures" below. The following items are NOT initialized:
See "Service mode operation procedures" below. If the waste ink amount is 7% or more, replace the bottom
See "Service mode operation procedures" below. Other than Japan: iP6000D
See "Service mode operation procedures" below. Confirm the operation button operation and the LCD
Remarks
Remarks
For a print sample, see 3-4. Verification Items, (1) Service
test print, <Service test print sample>.
For a print sample, see 3-4. Verification Items, (2)
EEPROM information print
- USB serial number
- Destination settings
- Waste ink counter
- CD-R correction value
case unit, or the ink absorbers.
Japan: iP6100D
viewer display. Perform them at the operation panel
replacement.