Installing The Sun-Shield Cover - GeoVision GV-BX110D User Manual

5.4.4 Installing the Sun-Shield Cover

After setting up the Bullet Camera, now you can install the sun-shield cover
to the camera.
1. Fasten the hexagon screws either on top or below the camera.
2. Put the sun-shield cover on top of hexagon screws. Make sure to aim
the rear hexagon screw at the edge of the sun-shield cover's aperture
for optimal sun-shield performance.
3. Fasten the Philips head screws with the plastic screw spacers.
Figure 5-19
Figure 5-20
Figure 5-21
Bullet Camera
5
69