Voltage Load Expansion (Optional) - GeoVision GV-BX110D User Manual

Gv-ipcam h.264

Hide thumbs Also See for GV-BX110D:

Table of Contents

6.7.2 Voltage Load Expansion (Optional)

The camera can only drive a maximum load of 200mA 5V DC. Connect the

camera to a GV-Relay V2 module (optional product) to expand the

maximum voltage load. See a comparison on maximum voltage loads with

and without GV-Relay below:

To connect the GV-Relay V2 module to the PTZ Camera, refer to the figure

and table below.

Maximum Voltage Load

Without GV-Relay V2

Pin 2 (Ground)

Pin 1 (Output)

With GV-Relay V2

10A 250V AC,

10A 125V AC,

Show Quick Links

Table of Contents