8.
For GV-MFD110, adjust image clarity using the GV-IP Device Utility
program. For details, see 11.2 Adjusting Image Clarity.
9.
Except for GV-MFD110, insert a Micro SD / SDHC / SDXC card into
the memory card slot (No. 7, Figure 4-2).
10. Secure the housing cover using the supplied torx wrench.
11. Optionally conceal the cable opening with the supplied cable stopper.
Figure 4-6
4.4.2 GV-MDR Series
1.
Paste the installation sticker on the desired location. The arrow should
point toward the direction that the camera faces.
2.
Drill one hole on each of the two curves for screw anchors. Drill the
circle (30 mm in diameter) if you want to run the cable into the ceiling.
48
Cable stopper
30 mm
Figure 4-7
Drill a hole
on each