Gv-Bx120D / 130D Series / 140Dw / 220D Series / 320D Series / 520D-0 - GeoVision GV-BX110D User Manual
Gv-ipcam h.264
Hide thumbs
Also See for GV-BX110D:
- User manual (393 pages) ,
- Quick start manual (130 pages) ,
- User manual (293 pages)
Table of Contents
Advertisement
2.4.2 GV-BX120D / 130D Series / 140DW / 220D Series /
320D Series / 520D-0
1.
If you are using the auto iris model, plug the iris control cable to the
Auto Iris Connector on the camera.
2.
Use a standard network cable to connect the camera to your network.
3.
Optionally connect a speaker and an external microphone.
4.
Optionally connect a monitor using a Video Out wire. Enable this
function by selecting your signal format at the TV Out field on the
Web interface. See 14.1.1 Video Settings.
5.
Optionally connect to input / output devices or an infrared illuminator.
For details, see 2.5.2 Infrared Illuminator and 2.6 I/O Terminal Block.
6.
Connect power using one of the following methods:
•
plugging the supplied power adapter to the power port.
•
using the Power over Ethernet (PoE) function and the power will
be provided over the network cable.
7.
The status LED of the camera will be on.
8.
You are ready to access the live view, adjust the image clarity and
configure the basics. See Getting Started, Chapter 12.
Figure 2-4
2
Box Camera
19
Hide quick links:
Advertisement
Table of Contents
