6.8.7 Auto Pan Settings
For the PTZ Camera to survey a horizontal view, establish an Auto Pan.
Up to 4 sets of Auto Pan can be created.
Configuring an Auto Pan
To configure a horizontal movement:
1
Adjust the angle of the camera view using the Up and Down
Control buttons since any vertical movements of the camera will not
be recorded by Auto Pan.
2
On the control panel, click the Option button (No. 6, Figure 6-15),
select Auto and select a Set Auto Pan number.
3
Click the Right or the Left Control buttons on the PTZ control panel
to perform the desired movement.
4
Click the Option button (No. 6, Figure 6-15), select Auto and select
an End Auto Pan number to save this configuration.
96