Notice For Using The Ir Arctic Box Camera; Enabling Ir Led After Loading Default - GeoVision GV-BX110D User Manual

3.6 Notice for Using the IR Arctic Box Camera

Ensure that you:
• enable IR LED function on the Web interface after loading the default
settings.
• disable the status LED to reduce reflection when a green light spot
appears on the live view.

3.6.1 Enabling IR LED after Loading Default

Each GV-BX-E series is equipped with 4 IR LEDs to provide infrared
illumination at night. The factory loaded setting for the IR LED function is
enabled. If you have restored the camera to default settings, please follow
the steps below to enable the IR LED function.
1. In the left menu of Web interface, select Video Settings and then
Streaming 1.
2. Enable Trigger IR by D/N in IR Check Function.
3. Click Apply.
Figure 3-12
IR Arctic Box Camera
3
37