Masters And Slaves; Setting Your Comfort Levels; Selecting Your Mode - Smart temp Falcon SMT-880 User's And Installer's Manual

Masters and Slaves

Your Falcon is a great deal more than a simple single home or office wall thermostat. Your Falcon system
can comprise of up to 4 wall controllers that all communicating with each other as well as with the nine
temperature-controlled zones. 1 Master controller and three slaves yet all operate equally.
With the Falcon system you are able
to adjust any zones settings from any
of the 4 wall controllers. For
example, check the
temperature from the
bedroom, or turn off the kid's
upstairs rumpus area off from the
kitchen when they forget and go out.
As power as the Falcon can be, it is a very simple system
to operate. It offers Intuitive functions with logical layout.

Setting your comfort Levels

The Falcons base function is comfort level control. It does this by comparing the current room
temperature with your desired target (or set) temperature. It then intelligently commands the AC system
under its control to supply warmed or cooled air into the Home or office and to the appropriate arrears
of your home or office if the optional zone control module is fitted.
The Falcon can maintain a single set temperature or automatically vary the temperature throughout the
day and night to match your lifestyle if you enable scheduling.

Selecting your Mode

Tap the MODE icon to change your control modes.
Your Falcon can operate in heating only mode, cooling only mode and auto mode.
Additionally, the Falcon can also control a single or multispeed fan system in a number of
ways.
Please note - It is important that you select the most appropriate mode for your needs. For example, if
your Falcon mode is set to heat only mode and your home/office or one of your zones require cooling
(provided the optional zone control module is fitted) then the Falcon will not request cooling for that zone
regardless of the zones cool set temperature. In heat only mode you have limited the Falcons control
ability to heating only – No cooling is provided and the "Cooling Wait" icon will be shown. This is also true
if your select cooling only mode. Your Falcon will provide heat to your home or office.
Off
There will be NO heating or cooling in your home or office - even if the room temperature rises or falls
above desired levels. Holiday schedules will not be used.
Heating Only mode
In heating only mode, your Falcon will control your AC system to warm your home or office. It will not
cool your home or office regardless of how high your home or office temperature becomes.
Cooling Only mode
Page 8
nursery
master
DRAFT