Qam I Nstallations - Dish Network Satellite Receiver User Manual

Chapter 11 381.fm Page 77 Thursday, May 21, 2009 6:19 PM
QAM I
NSTALLATIONS
If you live in an apartment, condominium or other clustered housing, your television signal is
transmitted to you through master multiplexing distribution equipment located in a central area in
your dwelling complex. This distribution equipment is owned and maintained by the dwelling
complex owners or managers.
Note: Do not change the setting on this screen unless otherwise directed.
U T
SING ROUBLESHOOTING
Your receiver has diagnostic tools that a Customer Service Representative may ask you to use if
you should ever run into problems while using your equipment. Even though these tools are quite
helpful, it is recommended that you only use them when on the phone with a DISH Network
representative.
Resetting Your Receiver
A Customer Service Representative will instruct you when to reset the receiver:
1
Press and hold the receiver POWER button until the front panel lights blink.
2
Release the POWER button.
The receiver may take several minutes to reset, complete downloads and power on again.
Connections and Setup
T
OOLS
QAM Installations
77