Dish Network Satellite Receiver User Manual page 79

Chapter 11 381.fm Page 72 Thursday, May 21, 2009 6:19 PM
Chapter 11
Connecting to a TV
• Press the PAGE DOWN button on the remote to change through the available options on any
of the other receiver outputs.
Only supported options for the type of program and the output in use are displayed. You can keep
pressing the PAGE UP or PAGE DOWN button until you reach the display format you like. The
receiver will remember the last selected output format independently for each type of output and
program type. The selected display format will be shown in the view banner when you change to a
new channel.
Screen Positioning
If you need to adjust the position of the video on the display screen:
1
Press MENU 6-1-9.
2
Select Adjust.
3
Use the ARROW buttons on the remote to change the vertical and horizontal positions of the video
and menu images on the screen.
4
Select OK to save the setting.
Note: Not all TV sets or monitors permit this feature to operate, as they may provide automatic
positioning that will conflict with settings on the receiver.
72