Dish Network Satellite Receiver User Manual page 82

Chapter 11 381.fm Page 75 Thursday, May 21, 2009 6:19 PM
1
Pressing MENU, then select System Setup, Installation, and then
Phone System.
2
Select the Touch Tone or the Rotary Phone option in the Phone Type list.
3
Select either the No Prefix or the Prefix Code option in the Outside Line Prefix list.
Note: Usually, you need a telephone number prefix only for business installations. For most
residential installations, all you need to do is set the telephone system type. The default setting of
No Prefix will allow correct dialing.
4
If you selected No Prefix, select Save.
5
If you selected Prefix Code, the receiver highlights the box where you must enter the exact
sequence you dial the phone to obtain an outside line.
6
Select Save.
C
ONNECTING A
Use this section to connect your VCR and set up the receiver for VCR Timers.
VCR Connections
The diagram below provides example of how to connect VCRs to your satellite TV system.
VCR
Connections and Setup
Connecting a VCR
75