Nilfisk-Advance EcoFlex BR 1100 S Service Manual page 34

Service Manual – Condor
™
4 Continue to hold the button for two seconds until the EcoFlex
5 Release the EcoFlex
,
OFF ECOFLEX MODE/MODE 1
6 Press the EcoFlex
™
ECOFLEX MODE
7 Press the scrub off switch to save the setting and display the key switch icon.
8 Turn the key switch off. The new setting will be saved until changed again.
Vacuum Motor Configuration Option
Note that the factory default setting for the vacuum motor configuration is
All rider scrubber models covered in this manual can be equipped with optional dual vacuum motors. The A1
control board assembly must be programmed for the number of vacuum motors installed so that the current
overload protection will function correctly. To select the vacuum motor configuration:
1 Turn the key switch off.
2 Press and hold the scrub system off and vacuum/wand switches
3 While holding both switches, turn the key switch on until the scrub off and vacuum/wand indicators
light
4 Release both switches. The vacuum/wand indictor will flash. The control panel display will now indicate
the vacuum motor setting
5 Press the vacuum/wand switch to toggle between
for two vacuum motors
VACUUM - DUAL
6 Press the scrub off switch to save the setting and display the key switch icon.
7 Turn the key switch off. The new setting will be saved until changed again.
Recovery Tank Full Detection Enable/Disable
Note that the factory default setting for the recovery tank full detection is
The Condor is equipped with a feature that will automatically shut off the vacuum and scrub systems
and display a recovery tank full icon on the control panel display when the recovery tank becomes full. If
problems are encountered with the vacuum shutoff feature, such as the vacuum shutting off even when the
recovery tank is not full, this feature can be turned off. To turn this feature on (enable) or off (disable):
1 Turn the key switch off.
2 Press and hold the vacuum/wand switch
3 While holding the vacuum/wand switch, turn the key switch on.
4 Continue to hold the vacuum/wand switch until the vacuum/wand indicator turns on
5 Release the vacuum/wand switch. The vacuum/wand indictor will blink and the scrub off indicator will
turn on The display will now show a text message
6 Press the vacuum/wand switch to toggle between
automatic shutoff feature is turned on
EcoFlex , BR 1100/1300 EcoFlex
™
button The display will now show the
™
and
ECOFLEX MODE/MODE 2
button to scroll through the menu and select the desired
DISABLE
™
and scrub off indicators turn on
™
ECOFLEX MODE/
menu
SINGLE
for a single vacuum motor or
VACUUM - SINGLE
ENABLE
REC TANK FULL DETECT
or
ENABLE DISABLE ENABLE
means that the automatic shutoff feature is turned off
Control System
ECOFLEX MODE
OFF
ECOFLEX MODE
MODE 1
ECOFLEX MODE
MODE 2
(one vacuum motor)
/ or
ENABLE DISABLE
means that the
34