Table of Contents
Advertisement
Press the 'Save current settings' function button to define the new settings as
5
default.
[9] Functions for the definition of standard settings
Press start (
6
When ready, exit the key operator system.
7
Defining the factory settings as default
Access the key operator system (see page 14).
1
Open the 'Machine' section and select 'Defaults'.
2
Press the 'Restore factory settings' function button to restore the Océ factory
3
defaults (see figure 9).
Press start (
4
Exit the key operator system.
5
Changing the standard margin shift
The standard or default margin shift setting (i.e. the distance over which the
margin is shifted on the copy) is set to 12 mm (12/24 inch). Any value between
-25 and 25 mm (-1 and 1 inch) can be set as the new default margin shift value.
To set the standard size of the extra margin
Access the key operator system (see page 14).
1
Open the 'Machine' section and select the 'Paper sizes'.
2
Configuration management
) to confirm the modified settings.
) to confirm the modified settings.
27
Advertisement
Table of Contents
