Table of Contents
Advertisement
Understanding the printer menus
Use
Audio Feedback
Button Feedback
On
Off
Volume
1–10
Show Bookmarks
Yes
No
Allow Background Removal
On
Off
Allow Custom Job Scans
On
Off
Scanner Jam Recovery
Job level
Page level
Web Page Refresh Rate
30–300
Contact Name
Location
Alarms
Alarm Control
Cartridge Alarm
Staple Alarm
Hole Punch Alarm
To
Set the audio volume for the buttons.
Notes:
•
On is the factory default setting for Button Feedback.
•
5 is the factory default setting for Volume.
Specify whether bookmarks are displayed from the Held Jobs area.
Note: Yes is the factory default setting.
Specify whether image background removal is allowed in copy, fax,
e‑mail, FTP, or scan‑to‑USB jobs.
Note: On is the factory default setting. The background of the
image is removed.
Scan multiple jobs to one file.
Note: On is the factory default setting. If On is selected, then the
Allow Custom Job Scans setting can be enabled for specific jobs.
Specify how a scanned job should be reloaded if a paper jam occurs
in the ADF.
Notes:
•
Job level is the factory default setting. If selected, then the
entire job must be rescanned if any pages jam.
•
If Page level is selected, then rescan from the jammed page
forward.
Specify the number of seconds between Embedded Web Server
refreshes.
Note: 120 is the factory default setting.
Specify a contact name for the printer.
Note: The contact name is stored on the Embedded Web Server.
Specify the location of the printer.
Note: The location is stored on the Embedded Web Server.
Set an alarm when the printer requires user intervention.
For each alarm type, select from the following options:
Off
Single
Continuous
Notes:
•
Single is the factory default setting for Alarm Control. Single
sounds three quick beeps.
•
Off is the factory default setting for Cartridge Alarm, Staple
Alarm, and Hole Punch Alarm.
•
Continuous repeats three beeps every 10 seconds.
153
Advertisement
Table of Contents
