Unsupported Disk; Unformatted Flash Detected - Lexmark MX910 Series User Manual

Mx910 series
Hide thumbs Also See for MX910 Series:
Table of Contents

Advertisement

Troubleshooting
Tray [x] paper size unsupported
Replace with a supported paper size.

Unformatted flash detected [53]

Try one or more of the following:
From the printer control panel, touch Continue to stop the defragmentation and continue printing.
Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and needs to be replaced.

Unsupported disk

Remove the unsupported printer hard disk, and then insert a supported one.
Unsupported option in slot [x] [55]
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the unsupported option card from the printer controller board, and then replace it with a supported card.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
Waste toner bottle nearly full [82.xy]
You may need to order a waste toner bottle. If necessary, touch Continue on the printer control panel to clear the
message and continue printing.
Weblink server not set up. Contact system administrator.
From the printer control panel, touch Continue to clear the message.
Note: If the message appears again, then contact your system support person.
286

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx910deMx911dteMx912dxeMx911deMx912de

Table of Contents