Description; Area Of Application, Using In Accordance With The Instructions; What Kind Of Spraying Material Can Be Applied - WAGNER GM 2800EA Operating Manual

Electrostatic air spray gun for manual operation with fl at or round jet nozzles

Hide thumbs Also See for GM 2800EA:

Table of Contents

EDITION 03/ 2007

OPERATING MANUAL

DESCRIPTION

4.1

The electrostatic spray gun can only be used with the control units VM 2000 or VM 200.

4.1.1

•

Paints containing solvents of the explosion class II A.

•

Enamels, primers, textured paints etc., which have a speciﬁ c resistance of > 50 kΩ (accord-

ing to the WAGNER or Ransburg scale).

•

The effectiveness of the spraying action is always dependant on the composition of the

paint being used, e.g. pigments or resin.

Note

With very highly conductive materials or those with a very high electrical resistance, the

electrostatic effect does not work as efﬁ ciently. The relationship between the values of the

high-voltage (kV) and the current (µA), shown on the HVM 2082, denotes the charging

capacity of a spray material.

• High kV-value, low µA-value (no wrap around) = Paint with too high electric resistance.

• Low kV-value, high µA-value (no wrap-around) = Paint with too low electric resistance

In the event of application problems, contact your WAGNER branch and the paint manu-

facturer.

PART NO. DOC388891

GM 2800EA

Table of Contents