Step 2: Specifying Output Destination For Metazastudio; Step 3: Preparing Instrument To Be Imprinted - Roland Metaza MPX-90M User Manual

2-1 Preparing for Printing

STEP 2: Specifying Output Destination for METAZAStudio

Procedure

Start METAZAStudio.
 P. 22, "How to Start The Software"



STEP 3: Preparing Instrument to be Imprinted

The requirements for the instrument to be imprinted by the machine are described below. The instrument
needs to meet all these requirements.
Thickness
0.3 to 40 mm (0.012 to 1.5 in.)
Size
The instrument is large enough to be firmly secured.
The machine uses the vise or adhesive sheet to secure the instrument to be imprinted. Though it is accepted
even if the size of the instrument is the one to protrude from the vise or adhesive sheet, the essential require-
ment is that the instrument can be firmly secured.
28
Chapter 2 Printing
Click [File] → [Set up the printer].
The [Print Setup] dialog box appears.
Select [MPX-90M].
Click [OK].