Changing Basic Settings Of Metaza Driver - Roland Metaza MPX-90M User Manual

4-1 More Advanced Operations

Impact--MIN
Impact--MAX
Vector Impact
Select [Advance].
[Advance] is available only when [Other] is selected in
 METAZA Driver online help ("[Correction] tab" > "[Details] dialog box")
OutputResolution
Drafting
Click [OK].
[Advance] dialogue close.

Changing Basic Settings of METAZA Driver

Procedure

Windows 7
From [Start] menu (
and Printers].
Windows Vista
From [Start] menu (
Windows XP
From [Start] menu
ers and Faxes].
60
Chapter 4 Appendix
You can set the minimum value of print impact for an image. Raise the
value when dark areas of the image are not struck.
Lower the value when dark areas of the image are whitish or when overall
striking is too forceful.
You can set the maximum value of print impact for an image. Raise the
value when bright areas of the image are struck with too little force or
when overall striking is too weak. Lower the value when bright areas of
the image are struck with too much force.
You can set the maximum value of print impact for a line.
You can specify the number of dots per inch. As the number of the points
becomes larger, the image will become more precise.
If you select "ON", you can skip image information in increments of one
dot.
), click [Control Panel] → [Hardware and Sound] → [Devices
), click [Control Panel] → [Hardware and Sound] → [Printers].
, click [Control Panel] → [Printers and Other Hardware] → [Print-
Enter a name for the composition you're
registering.
Enter [Speed/Impact]
The printing results vary according to the hardness
of the material. Adjust to match the material.
 METAZA Driver online help ("[Correction] tab" > "[Details]
dialog box")

in step .