Table of Contents
Advertisement
Loosen
The center of the
knob must be posi-
tioned immediately
above the top of
the triangle.
Lift the head.
Remove the power cord and USB cable.
Attach the retaining materials.
Secure the machine at three points (with 5 screws). Attach all the retainers and wind up the screws with
the provided hexagonal wrench.
Close the cover and repack the machine in the original package.
When moving the machine, be sure to support it at the bottom using two hands. Attempting to move
the machine by holding it at a different location may result in damage.
Tighten
Head
Retainer
Storage location for
retainers and screws
4-3 When Moving the Machine
Fix the head at the highest position.
After loosening the knob, lift the head to the highest
position and tighten the knob.
Hexagonal
wrench
Retainer
Chapter 4 Appendix
Rear
81
Advertisement
Table of Contents
