Module Programming; Default (Factory); Factory Default - Member's Mark Power 832 Installation Manual

P R O G
5.26.4 LINKS Special Preamble
In some areas of North America, dialing #DAT or ✱DATA reduces the cellular billing increment. The LINKS
Special Preamble (section [393]), allows the use of [✱] and [#] characters for the programming of #DAT and
✱DATA.
The LINKS Special Preamble is sent BEFORE the Preamble programmed in Sections [390] to [392].
Example: [Special Preamble][Regular Preamble][Telephone Number]
If this Special Pr If this Special Pr
If this Special Pr If this Special Pr If this Special Preamble is pr
telephone numbers. Hex digits D and E ar telephone numbers. Hex digits D and E ar
telephone numbers. Hex digits D and E ar telephone numbers. Hex digits D and E ar telephone numbers. Hex digits D and E are not suppor
If Busy T If Busy T If Busy Tone Detection is enabled, the LINKS1000 must be tested to ensur If Busy T If Busy T one Detection is enabled, the LINKS1000 must be tested to ensure full operation. one Detection is enabled, the LINKS1000 must be tested to ensur one Detection is enabled, the LINKS1000 must be tested to ensur one Detection is enabled, the LINKS1000 must be tested to ensur
Please refer to the LINKS1000 installation Manual for more information and connection diagrams.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LINKS Preamble (First Telephone Number) ............................................... Section [390]
LINKS Preamble (Second Telephone Number) .......................................... Section [391]
LINKS Preamble (Third Telephone Number) .............................................. Section [392]
LINKS Preamble (All Telephone Number) .................................................. Section [393]
LINKS Preamble (Downloading Telephone Number) ................................. Section [490]
Communicator Call Direction Options ........................................... Section [361] to [368]
Call LINKS as well as Land Line ............................................... Section [380], Option [7]
Maximum Dialing Attempts ......................................................................... Section [160]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5.27

Module Programming

The programming sections listed below pertain to additional modules on the system. For instructions on
programming these modules and a description of each programming section, see their respective installation
manuals.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
PC5400 Programming ............................................ Section [801]
PC5928 Programming ............................................ Section [802]
Alternate Communicator Programming ................. Section [803]
PC5132 Programming ............................................ Section [804]
PC5108L Programming .......................................... Section [806]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5.27.1 PC5928 Audio Interface Module
The PC5928 Audio Interface will allow you to connect up to 7 Interior (PC5921) or exterior (PC5921EXT) Intercom
Stations. These attractive, surface mount stations contain both speaker and microphone and will allow you to
add intercom features to your alarm system such as:
• Page/Answer
• Answer Incoming Calls
In addition to these features the module also has the Listen-in feature for central station monitoring. The central
station can select the audio station, listen/talk, extend on-line time and hang up. The Listen-In feature can be
enabled separately for telephone numbers 1/3 and 2.
All talk/listen and/or video sessions will be disconnected if the panel needs to communicate alar All talk/listen and/or video sessions will be disconnected if the panel needs to communicate alar
All talk/listen and/or video sessions will be disconnected if the panel needs to communicate alar All talk/listen and/or video sessions will be disconnected if the panel needs to communicate alar All talk/listen and/or video sessions will be disconnected if the panel needs to communicate alarms to
the central station. the central station. the central station. the central station. the central station.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Phone 1 & 3 Listen-In Enabled .............................. Section [381], Option 5
Phone 2 Listen-In Enabled ..................................... Section [381], Option 6
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5.27.2 Periodic Camera Test
When the Periodic Camera Test option is enabled, the panel will test cameras connected to a PC5108L module
every 30 minutes. Only cameras with the Camera Test option enabled will be tested. See your PC5108L
Installation Manual for more information on camera tests.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Periodic Camera Test ............................................. Section [017], Option [7]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5.28

Default (Factory)

On occasion it may be necessary to default the main control panel or one of the modules that can be connected.
There are several different defaults available including defaulting the main control panel, Escort5580 module,
PC5132 Wireless Expander Module, PC5400 Printer module and an Alternate Communicator module.
Note: Defaulting the main panel does not default the keypads. Please refer to "Programming LCD5500Z
Keypads" in the Programming Worksheets for defaulting the LCD5500Z. PC55XXZ LED and LCD5501Z
keypads must be manually reprogrammed in installers section [000].
5.28.1 Factory Default Main Panel (Hardware)
Step 1 - Remove AC and battery from the panel.
Step 2 - Remove all wires from the Zone 1 and PGM1 terminals.
Step 3 - With a piece of wire short the Zone 1 terminal to the PGM1 terminal.
Step 4 - Apply AC power to the main panel.
Step 5 - When Zone Light 1 is lit on the keypad the default is complete.
Step 6 - Remove AC power from the control
Step 7 - Reconnect all original wiring and power up the control.
AC power must be used to power the panel. The panel will not default if the batter AC power must be used to power the panel. The panel will not default if the batter
AC power must be used to power the panel. The panel will not default if the batter AC power must be used to power the panel. The panel will not default if the battery is used. AC power must be used to power the panel. The panel will not default if the batter
R A M D
eamble is pr eamble is pr ogrammed, it will be inser ogrammed, it will be inser
eamble is programmed, it will be inser eamble is pr ogrammed, it will be inserted befor ogrammed, it will be inser
• Do Not Disturb
• Doorbell Function
WWW.DIYALARMFORUM.COM
E S C R I
ted befor ted befor e the Regular Pr e the Regular Pr
ted before the Regular Pr ted befor e the Regular Preamble of ALL e the Regular Pr
e not suppor e not suppor ted for Pr ted for Pr eamble pr eamble pr
e not suppor e not supported for Pr ted for Pr ted for Preamble pr eamble pr eamble programming.
• Baby Listener Broadcast
• Background Music
37
P T I O N
eamble of ALL eamble of ALL
eamble of ALL eamble of ALL
ogramming. ogramming.
ogramming. ogramming.
e full operation. e full operation. e full operation. e full operation.
ms to ms to
ms to ms to
y is used. y is used.
y is used. y is used.
S