Specifications - Konica Minolta Vivid 910 Instruction Manual

Specifications

Model Name
Measurement Method
AF
Light-Receiving lens
(exchangeable)
Object Distance Range
Field of View
Laser Power
Laser Scanning Method
Scan Mode
X Direction Input Range
(Varies with the distance)
Y Direction Input Range
(Varies with the distance)
Z Direction Input Range
(Varies with the distance)
Accuracy
Precision (Z, σ, Typ.)
Input Time
Image Data Transfer Time to
Computer
Allowed Environmental
Light
Imaging Device
Output Data Points
Output Format
Memory Media
Data Capacity
Viewfinder
Output Interface
Non-contact 3D digitizer VIVID 910/VI-910
Triangulation, light-stripe method
Image surface AF (contrast method), Active AF
TELE : Focal distance f=25 mm
MIDDLE: Focal distance f=14 mm
WIDE : Focal distance f=8 mm
0.6 to 2.5 m (2 m for WIDE lens)
0.6 to 1.2 m
Max. 30 mW, 690 nm
*IEC Class 2 (for Europe) with IEC PUBLICATION 60825-1:1993, Amendment-1:1997
*FDA Class I (for US.) with 21CFR chapter 1, Subchapter J.
Galvano mirror
FAST (high-speed mode)/FINE (high-accuracy mode)
High quality mode
Dynamic range mode
(Selectable when measurement is taken using the Polygon Editing Tool Software
(standard accessory))
111 to 463 mm (TELE), 198 to 823 mm (MIDDLE),
359 to 1196 mm (WIDE)
83 to 347 mm (TELE), 148 to 618 mm (MIDDLE),
269 to 897 mm (WIDE)
40 to 500 mm (TELE), 70 to 800 mm (MIDDLE),
110 to 750 mm (WIDE/FINE mode)
TELE X: ±0.22 mm, Y: ±0.16 mm,
Z: ±0.10 mm to the Z reference plane
MIDDLE X: ±0.38 mm, Y: ±0.31 mm,
Z: ±0.20 mm to the Z reference plane
WIDE X: ±1.40 mm, Y: ±1.04 mm,
Z: ±0.40 mm to the Z reference plane
(Conditions: FINE mode, distance 0.6 m, KONICA MINOLTA SENSING's standard
3D chart, KONICA MINOLTA SENSING's processing software, temperature 20ºC,
relative humidity 65% or less)
TELE 8 μm, MIDDLE 16 μm, WIDE 32 μm
(Conditions: FINE mode, distance 0.6m, KONICA MINOLTA SENSING's standard
2D chart, KONICA MINOLTA SENSING's processing software, temperature 20°C,
relative humidity 65% or less)
0.3 sec. (FAST mode), 2.5 sec. (FINE mode),
0.5 sec. (COLOR)
Approx. 1 sec. (FAST mode), 1.5 sec. (FINE mode)
500 lx or less
3D data : 1/3-inch frame transfer CCD (340,000 picture elements)
Color data : 3D data is shared (color separation by rotary filter)
3D data : 640 × 480 (FINE mode)
320 × 240 (FAST mode)
Color data : 640 × 480
3D data : Original format
(Converted to 3D by the standard utility software)
Color data : RGB 24-bit raster scan data
ATA PC card Type II
1.6MB/card (FAST mode), 3.6MB/card (FINE mode) (in total of 3D data and color data)
5.7-inch LCD (320 × 240 picture elements)
* There may be rare cases in which the point that is normally lit or unlit may break up
(dot break up); however, this will not have any influence on the scanning data.
SCSI II (DMA synchronous transfer)
59