Specifications - Konica Minolta CM-36dGV Instruction Manual

Specifications

di: 8°, de: 8° (diffused illumination, 8° viewing),
SCI (specular component included) / SCE (specular component excluded) switchable
Conforms to CIE No. 15 (2004), ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z 8722
Illumination/
Condition c standard
viewing
system
di: 0°, de: 0° (diffused illumination, 0° viewing)
Conforms to CIE No. 15 (2004), ASTM E1164, DIN 5033 Teil7, JIS Z 8722 Condition g
standard
Size of integrating Ø152 mm (6 inches)
sphere
Detector Dual 40-element silicon photodiode arrays
Spectral Diffraction grating
separation device
Wavelength 360 to 740 nm
range
Wavelength pitch 10 nm
Half bandwidth Approx. 10 nm
Reflectance range 0 to 200%; Resolution: 0.01%
Light source Pulsed xenon lamps × 3 (2 with UV cut filters)
Illumination area
Measurement area
Colorimetric values: Standard deviation within ΔE*ab 0.02
Spectral reflectance: Standard deviation within 0.1%
Repeatability
(When a white calibration plate is measured 30 times at 10-second intervals after white
calibration)
Within ΔE*ab 0.12
Inter-instrument
(Based on average for 12 BCRA Series II color tiles; LAV/SCI. Compared to values
agreement
measured with a master body under Konica Minolta standard measurement conditions)
100% / 0% / Adjusted (Instantaneous numerical adjustment of UV with no mechanical
UV setting filter movement required)
400 nm and 420 nm UV cutoff filters
*1 Numerical adjustment of UV requires UV Adjustment Software (included with optional SpectraMagic NX Pro Ver. 3.2 or later).
LAV LMAV
Ø30 mm Ø20 mm
Ø25.4 mm Ø16 mm
*1 ;
38
CM-36dGV
MAV SAV
Ø11 mm Ø7 mm
Ø8 mm Ø4 mm
Transmittance
Ø24 mm
Ø17 mm