Setting Auto Read - Konica Minolta Vivid 910 Instruction Manual

Setting Auto Read

With certain objects, a better image can sometimes be acquired if the condition of the laser beam emitted to
scan a range image differs from that emitted to scan a color image.
In this case, set Auto Read to OFF as explained below.
[Operating Procedure]
1
Press .
The MENU view will appear.
2
Press to locate the arrow cursor to
"CAMERA SETTINGS".
3
Press .
The CAMERA SETTINGS view will appear.
4 Press to locate the arrow cursor to "AU-
TO READ".
5
Press .
The currently set auto read mode (ON or OFF) will
turn to pink.
6 Press to select "OFF".
7
Press .
Auto Read mode will be set to OFF.
M
emo
If Auto Read is set to OFF, no color image will be scanned even though
image, press again.
Scanning the Object
is pressed to scan. To scan a color
41