Specifications - Konica Minolta CF-300 Instruction Manual

Specifications

Model
di:8°, de:8° (diffuse illumination: 8° viewing)
Illumination/ SCI (specular component included)/SCE
viewing system
(specular component excluded) switchable
Conforms to JIS Z 8722 condition c, ISO 7724/1
Integrating
Ø152 mm
sphere size
Detector Dual 40-element silicon photodiode arrays
Spectral
Planar diffraction grating
separation device
Wavelength range 400 -700 nm
Wavelength pitch 10 nm
Measurement range 0 -175%; Output/display resolution: 0.01%
Light source High-CRI white LED
Illumination area
MAV
Measurement area
Contact measurements (MAV/XUSAV target mask): 0.0 mm
Measurement
distance
Non-contact measurements (NC target mask): 1.0 mm
Measurement time Approx. 0.1 seconds
Minimum
measurement Approx. 0.2 seconds
interval
Chromaticity value: Standard deviation
within E*ab 0.02
Repeatability
(When MAV/SCI contact measurements of a white calibration plate are
taken 30 times at 1-second intervals after white calibration)
Within E*ab 0.15
Inter-instrument
(Based on MAV/SCI contact measurements of 12 BCRA Series II color tiles compared
agreement
to values measured with a master body under Konica Minolta standard conditions)
Interface USB 2.0, RS-232C
Power Dedicated AC adapter (AC 100 to 240 V, 50/60 Hz)
Operation
temperature/ 15 - 30°C, relative humidity is 80% or less (at 30°C) with no condensation
humidity range
Storage
temperature/ 0 - 40°C, relative humidity is 80% or less (at 35°C) with no condensation
humidity range
Size (W×H×D) Approx. 186 × 202 × 317 mm (Including handle height: 246 mm)
Weight Approx. 7.3 kg
The specifications and appearance shown herein are subject to change without notice.
Spectrophotometer CF-300
φ11 mm
5×7 mm
XUSAV
φ8 mm
0.75×1 mm
34
φ34 mm
NC
（Noncontact
φ8 mm
measurement）
0.75×1 mm