Setting The Scsi Id No - Konica Minolta Vivid 910 Instruction Manual

Connecting the VIVID 910 to a Computer

Setting the SCSI ID No.

In order for the computer to recognize that the VIVID 910 is connected to the computer via the SCSI interface,
a SCSI ID No. (0 to 6) must be set for the VIVID 910.
M
emo
SCSI ID No. 5 has been set as the default setting before shipment.
N
ote
If other devices are connected to the computer via the SCSI interface, make sure that the SCSI ID No. of the VIVID
910 differs from those set for the devices.
[Setting Procedure]
1
Press
The MENU view will appear.
2
Press
"CAMERA SETTINGS".
3
Press
The CAMERA SETTINGS view will appear.
4
Press
SI ID".
5
Press
The currently selected SCSI ID No. will turn to pink.
6
Press
<Settings>
• 0 to 6: SCSI ID No.
7
Press
Setting is now complete.
18
.
to locate the arrow cursor to
.
to locate the arrow cursor to "SC-
.
to select the desired SCSI ID No.
.