Replacing The Sample Ram Backup Battery; Precautions; Installation - Korg Pa3X 76-keys User Manual

Replacing the Sample RAM backup battery

258

Precautions

Replacing the Sample RAM backup battery
You can replace the Sample RAM backup battery with a replace-
ment model (Korg BAT0001002). Do not use replacements dif-
ferent than the one supplied or suggested by Korg, or you risk
to damage the instrument! The battery can be replaced by the
user. Korg is not responsible for any damage or injury caused
by incorrect installation of this part.
Precautions
• Installation of the battery is done at the user's own risk. Korg
will assume no responsibility for any damage or injury resulting
from its improper installation or use.
• Be sure to disconnect the instrument from the AC plug, before
opening it.
• To prevent your body's static electricity from damaging the
board's components, touch an unpainted metallic component
before proceeding with the installation.

Installation

For installation, you will need a cross-point screwdriver (not sup-
plied).
Extract the battery from its package.
1.
2. From the bottom of the instrument, remove the six fixing
screws (a) and the three flat head fixing screws (b), and
keep them apart. Open the cover (c) to gain access to the
inside of the battery slot, and keep the cover apart.
Remove the exhausted battery (d) from its slot (e), and dis-
3.
connect it from its connector (f).