Midi: Midi In Control - Korg Pa3X 76-keys User Manual

MIDI: MIDI In Control

This page lets you program general parameters for the MIDI IN
and USB Device port, like the Chord Recognition channel and
MIDI parameters for the Voice Processor.
Midi In Controls
Midi In Octave Transpose
Use this parameter to determine if the Octave Transpose is
applied also to notes received on the MIDI IN or USB Device
port.
On Notes received on the MIDI IN or USB Device
port are transposed according to the Octave
Transpose setting for each track.
Off Data received on the MIDI IN or USB Device
port are not transposed.
Track Mute Active
Use this parameter to determine if a muted track can still play
data received on the MIDI IN or USB Device port.
On No data received on the MIDI IN or USB Device
port on a muted track can be played by Pa3X.
Off Data received on the MIDI IN or USB Device
port on a muted track can still play on the Pa3X.
Chord 1 Midi Channel
Chord 2 Midi Channel
Notes entering these channels on the MIDI IN or USB Device
port, are sent to the Chord Recognition engine.
There are two separate Chord channels. This is very useful when
you must send chords to Pa3X on two different channels (like
with some MIDI accordions).
Off Data received on the MIDI IN or USB Device
port is not sent to the Chord Recognition engine.
1...16 Data received on these channels via the MIDI IN
or USB Device port is sent to the Chord Recogni-
tion engine.
Upper Octave Transp (Transpose)
Octave transposition of data received on the MIDI IN or USB
Device port for the Upper tracks. For example, if you select the
+1 value, a received C4 will play a C5 on the Pa3X.
This parameter may be useful to many MIDI accordion players,
whose MIDI interface may transmit on an unexpected octave.
-2...+2 Octave transpose value.
Lower Octave Transp (Transpose)
Octave transposition of data received on the MIDI IN or USB
Device port for the Lower track. For example, if you select the +1
value, a received C4 will play a C5 on the Pa3X.
This parameter may be useful to many MIDI accordion players,
whose MIDI interface may transmit on an unexpected octave.
-2...+2 Octave transpose value.
Midi In Velocity Value
Use this parameter to set a fixed velocity (dynamics) value for all
received MIDI notes. This is useful when playing the Pa3X with
Mid
an organ or a MIDI Accordion.
Normal Received velocity values are left unchanged.
40...127 All received velocity values are converted to the
selected value.
Voice Processor Midi controls
Midi In Channel
Notes received on this channel are sent to the Harmony section
Mid
of the Voice Processor.
Off No data is sent to the Voice Processor.
1...16 Data received on this channel via the MIDI IN or
USB Device port is sent to the Voice Processor.
Octave Transpose In
Octave transpose for all notes received via MIDI by the Har-
mony section of the Voice Processor.
Mid
-2...+2 Octave transpose value.
Mid
In Note Range-High
This is the highest note that can be received by the Harmony sec-
tion of the Voice Processor. Notes received over this note are not
recognized.
B-1...G9 Highest note.
In Note Range-Low
This is the lowest note that can be received by the Harmony sec-
tion of the Voice Processor. Notes received under this note are
not recognized.
C-1...G#8 Highest note.
Global edit mode
211
MIDI: MIDI In Control
Mid
Mid
Mid
Mid
Mid
Mid
Mid