Korg Pa3X 76-keys User Manual page 60

Selecting and playing Styles
56
Selecting and playing a Style
2
Select a Style from the Style Select window.
3
Be sure one of the Chord Scan modes is selected.
4
Press the SYNCHRO-START button to turn its LED on.
5
Play the keyboard.
6
Press START/STOP to stop the Style.
The Style Select window closes, and
the main screen appears again, with
the selected Style ready to go.
For chord scanning to work, either of both LEDs must be turned
on. Lower: chords are recognized on the left of the split point;
Upper: chords are recognized on the right of the split point; Full
(both LEDs on): chords are recognized on the whole keyboard.
Off: only the Drum track can be heard.
When the Syncho-Start function is turned on, the Style starts
playing as soon as you play a note or chord in the chord recogni-
tion area. Play chords with your left hand, and the melody with
your right hand. The arranger will follow your playing.
i
Note: Selection windows
may automatically close
after a selection. To do this,
uncheck the "Display Hold"
box in the Global > General
Controls > Interface page. In
this case, press the EXIT but-
ton only if you don't make
any selection but want to
close the window.
i
Note: You could simply
press START/STOP to start the
Style, but the Synchro-Start
function allows you to make
the Style start in sync with
your playing on the key-
board. Therefore, it may be
considered a "more musical"
way of starting a Style.