Korg Pa3X 76-keys User Manual page 188

Sequencer operating mode
184
Record mode: Step Backing Sequence page
Beat Divider in the Time Signature ratio (e.g., a quar-
ter in a 3/4 time).
Tick Smallest position value. Both Pa3X internal play-
ers feature a resolution of 384 ticks per quarter.
Style
This is the latest selected Style. To insert a Style change at the
current position, touch the Style name to open the Style Select
window, or follow the standard selecting procedure using the
buttons of the STYLE SELECT section.
Note: Any Style Change inserted after the beginning of the mea-
sure (i.e., to a position other than Mxxx.01.000) will be effective at
the following measure. For example, if a Style Change event has
been inserted at M004.03.000, the selected Style will be effectively
selected at M005.01.000. (This works exactly as in Style Play
mode).
Note: When inserting a Style Change, you may also insert a
Tempo Change at the same position. A Style Change will not auto-
matically insert the Style's Tempo.
Performance
This is the latest selected Performance. Select a Performance to
recall the Style it links to. To insert a Performance change at the
current position, touch the Performance name to open the Per-
formance Select window, or follow the standard selecting proce-
dure using the PERFORMANCE SELECT section.
Note: The STYLE CHANGE LED is automatically turned on
when entering the Chord/Acc Step Mode. This means that selecting
a Performance automatically selects the Style memorized in the
Performance.
The STS MODE and STS buttons are automatically disabled,
meaning that you can't change Keyboard tracks while in Chord/
Acc Step Mode.
Tempo
This is the Tempo Change parameter. To insert a Tempo Change
event at the current position, select this parameter and use the
VALUE controls to change its value.
Chord
The chord parameter is divided in four separate parts:
Name Type
Select one of the parts, then use the VALUE controls to modify
it. As an alternative, you can play a chord, and it will be automat-
ically recognized. While recognizing a chord, the status of the
BASS INVERSION button will be considered.
The lack of a chord (--) means that the accompaniment will not
play at the current position (apart for the Drum and Percussion
tracks). To select the "--" option, select the Name part of the
Chord parameter, then use VALUE controls to select the very
last value (C...B, Off).
Note: If you replace a chord with a different one, please remember
that the Lower track (if recorded) will not be automatically
changed, and may cause a dissonance against the accompaniment.
Tension Extension
Style Element
This is the Style Element (i.e., a Variation, Fill, Intro, or Ending).
The length of the selected Style Element is always shown by the
"Length" parameter (see below).
"Off " means that the accompaniment will not play at the
selected position – only Keyboard and Pad tracks will play.
Hint: Insert a Style Element Off event exactly where the automatic
accompaniment must stop (at the end of the Song).
Length
This parameter will let you know where to place the following
Style Element Change. For example, if you inserted an Intro
event lasting for 4 measures, you can insert 4 empty measure
after this event, and a Variation event at the end of the Intro,
beginning at the 4th empty measure.
Del (Delete) button
When a side arrow ( ) is shown next to a parameter, there is an
event at the current position. You can touch the Del button next
to it, to delete the event at the current position.
Hint: To delete all events starting from the current position, select
the "Delete All from Selected" command from the page menu (see
below).
"Soft" transport buttons
Previous or Next Event
Use these buttons to move to the previous or next recorded
event.
Previous or Next Step
Use these buttons to go to the previous or next step (1/8, or 192
ticks). If an event is located before the previous or next step, the
locator stops on that event. For example, if you are positioned on
M001.01.000, and no event exists before M001.01.192, the > but-
ton moves to the M001.01.192 location. If an event exists on
M001.01.010, the > button stops to the M001.01.010 location.
These commands are effective even if the Measure parameter is
not selected.
Previous or Next Measure
Use these buttons to move to the previous or following measure.
These commands are effective even if the Measure parameter is
not selected.