Mac OS X: Installing KORG USB-MIDI Driver
1.
Connect the DEVICE USB port of your Pa3X to one of the
USB ports of your Mac by using a standard USB cable.
Insert the included Accessory Disk into the optical drive of
2.
your Mac.
Please double click on the "KORG USB-MIDI Driver.pkg"
3.
in the "KORG USB-MIDI Driver" folder inside the CD-
ROM, to run the installer. Install it according to the
instructions appearing on-screen.
Installing the Korg USB MIDI Driver
Mac OS X: Installing KORG USB-MIDI Driver
Driver's ports
After installation, the following ports will be shown in you MIDI
application (e.g., sequencer) among the other MIDI devices:
Pa3X KEYBOARD: This allows for reception of MIDI messages
from the Pa3X (keyboard and controller's data) to the MIDI
application running on the Mac.
Pa3X SOUND: This allows for transmission of MIDI messages
from the MIDI application running on the Mac, to the internal
tone generator of the Pa3X.
261