Korg Pa3X 76-keys User Manual page 232

Media edit mode
228
Load
Select the bank file you are looking for, and touch Open to
6.
open it. A list of items appears.
7. Select the item you are looking for, and touch Load to con-
firm the load. A dialog box appears, asking you to select
one of the available locations in memory.
In the dialog box above, the previously selected Style will be
loaded into location 01 of the bank U01 in memory. The
existing Style at the same memory location will be deleted
and overwritten.
Empty locations are named "- - - ".
8. Select the target location, and touch OK to load the source
file.
Warning: After confirming, the item you are overwriting in
memory will be deleted.
Note: If a Sound or Drum Kit based on external PCM sam-
ples is deleted, choose the "Delete" command from the page
menu of the Sampling mode to delete the unused samples (see
the "Advanced Edit" addendum in the Accessory Disk).
Note: If you are loading a Sound or Drum Kit making use of
an User PCM Sample, the Sample is automatically loaded
(unless it is already in memory). This way, all needed Sam-
ples are always loaded together with the Sound or Drum Kit
making use of them.
Loading Pa2X/Pa800 data
You can load Pa2X/Pa800 data exactly as if they were Pa3X data,
apart for the Global (GLB) and Voice Processor Presets (VOC)
files. Global files are not loaded. Due to the different order in
memory, Styles must be reassigned to SongBook entries by using
the SB Editor software (freely available on www.korg.com).
It is not possible to load Pa3X data into a Pa2X/Pa800.
Loading Pa1X data
You can load Pa1X data exactly as if they were Pa3X data, apart
for the Global (GLB) and Voice Processor Presets (VOC) files.
Global files are not loaded. Major differences might exist
between effect parameters. Due to the different order in mem-
ory, Styles must be reassigned to SongBook entries by using the
SB Editor software (freely available on www.korg.com).
It is not possible to load Pa3X data into a Pa1X.
Loading Pa80/60/50 data
You can load Pa80/60/50 data exactly as if they were Pa3X data.
The only difference is that the "SOUND" folder of Pa3X is called
"PROGRAM" in the Pa80/60/50. Therefore, to load Sounds
from Pa80/60/50 disks, you must accomplish one of the follow-
ing operations:
• Either rename the "PROGRAM" folder "SOUND" (by
using a personal computer) before loading a ".SET" folder;
or
• First load the ".SET" folder, then separately load the ".PCG"
file from the "PROGRAM" folder.
Loading i-Series data
Pa3X is compatible with the Styles of the older i-Series instru-
ments. You can load them as if they were ordinary Pa3X data.
Copy the old i-Series data into an USB device, or transfer
1.
them to the internal storage memory of the Pa3X.
2. Press MEDIA to go to the Media mode. Select the Load
page if needed.
While in the Load page, select the device containing the i-
3.
Series data from the Device pop-up menu.
If you are reading an i30 file, select the ".SET" folder and
4.
touch the Open button in the display.
5. Select the ".STY" folder.
At this point, you can load the whole ".STY" folder, or open
6.
it and select a single Style.
• To load the whole folder, touch the Load button in the
display. If it contains more than 40 Styles, they will be
loaded into the USER banks sequentially, otherwise you
will be prompted to select one of the three USER Style
banks or the twelve FAVORITE Style banks in memory.
Once the target bank is selected, touch Load to load the
bank. The "Are you sure?" message will appear. Touch OK
to confirm, or Cancel to abort.
• To load a single Style, touch Open in the display to open
the ".STY" folder. Since a conversion will be started at this
point, please wait some seconds for the operation to be
completed.
Select the Style to load, then touch Load. You will be
prompted to select a target location in memory. Once the
target location is selected, touch Load to load the Style. The
"Are you sure?" message will appear. Touch OK to confirm,
or Cancel to abort.
Note: Loading a whole ".SET" folder from an i30 file may
take some time due to format conversion.