Recording - Korg Pa3X 76-keys User Manual

Recording a new Song (Standard MIDI File)
98

Recording

Recording
1
Select the Style Element you wish to use before starting to play.
Select one of the Intros to start with an introduction.
Select any of the Variations before starting to record.
2
Start recording, by pressing the START/STOP button.
3
Play as if you were performing live with the Styles.
During recording, select any Style Element (Intro, Variation, Fill, Break, Ending...) you like. You
can also press START/STOP to stop the Style, and press it again to start the Style up again!
Please remember that, while recording in Backing Sequence Record mode, you cannot use the
SYNCHRO, TAP TEMPO/RESET, BALANCE controls.
4
When finished recording your Song, press the
1 section to exit recording, and return to the main page of the Sequencer mode.
5
While in the main page of the Sequencer mode, press the
the PLAYER 1 section to listen to the recorded Song.
The Backing Sequence Song has been converted to an ordinary Song (in Standard MIDI File, or
"MID", format). If you like it, you can save it, and read it in Song Play mode, or with any external
sequencer.
6
To edit the Song, press MENU to enter Edit mode (see instructions starting from
page 186).
(PLAY/STOP) button in the PLAYER
After pressing the PLAY/STOP button, the main
page of the Sequencer mode appears again.
(PLAY/STOP) button in
i
Note: If you do not wish
to start the Song with the
Style playing, you can simply
start recording by pressing
the PLAY/STOP button
in the PLAYER 1 section, and
start the Style only later. The
Style will start at the next
beginning of the measure.