Pad Panel - Korg Pa3X 76-keys User Manual

Saving the track's status
• The status of Keyboard tracks can be saved to a Performance
or STS, and can be changed when choosing a different Perfor-
mance or STS (see "Write Performance" on page 137 and "Write
Single Touch Setting" on page 137).
• The status of the separate Style tracks can be saved to the cur-
rent Style Settings (see "Write Current Style Settings" on
page 137).
• The status of the grouped Style tracks can be saved to the
Global-Style Play Setup (see "Write Global-Style Play Setup" on
page 137).
Track names
Under the sliders, a label for each track is shown. Use the
TRACK SELECT button to switch between the various track
views.
Track Description
Normal View
(*) Grouped Drum and Percussion tracks.
DR/PERC
(*) Grouped Accompaniment tracks (Acc1-5).
ACCOMP
(*) Grouped Bass Style track.
BASS
MIC/IN Microphone (Voice Processor). Sources con-
nected to the Left and Right Audio Inputs are
not controlled by this slider. The volume is set
via the MIC VOLUME knob in the MIC SET-
TINGS section of the control panel.
LOWER Lower track.
UPPER1...3 Upper tracks.
Style Tracks View
DRUM Drum Style track.
PERC Percussion Style track.
BASS Bass Style track.
ACC1...5 Accompaniment Style tracks.
(*).Volume for these grouped tracks is a global offset and can be memorized
when choosing the "Write Global-Style Play Setup" command form the page
menu.
Style Play operating mode

Pad panel

Touch the Pad tab to select this panel. This is where you can
assign a different Hit or Sequence Pad to each of the four pads,
and see at a glance how pads are programmed. For more options,
go to the "Pad/Switch: Pad" page (see page 133).
Pad assignment
Name of the Hit or Sequence assigned to each Pad. Touch the
box to make the Pad Select window appear (see "Pad Select win-
dow" on page 105).
Note: Each Style or SongBook entry can change the Pad assign-
ment.
Pads lock icon
When locked, assignments to the pads remain unchanged when
selecting a different Style or SongBook entry.
This lock is reset when turning the instrument off, unless you
write Global settings to memory (see "Write Global - Global
Setup dialog box" on page 220).
For more information on parameter locks, see "General Con-
trols: Lock" on page 204.
117
Pad panel
Set
Gbl