Applying Harmony To Your Voice - Korg Pa3X 76-keys User Manual

5
Use the "Filter" , "HardTune" , "uMod" and "Delay" buttons to turn the various effect sec-
tions on/off, and listen to the resulting sound.

Applying harmony to your voice

You can let Pa3X add automatically-generated harmonize your lead voice with up to four backing
voices. Each Voice Processor Preset may contain a different harmonization style (for example, chang-
ing the number of voices, or the way notes from the keyboard, the Style or the Song are received).
1
Select a Voice Processor Preset containing the desired harmonization style.
By default,
• Preset #1 expects you play chords, and receives notes from the keyboard (the recognition zone
depends on the Chord Scan section);
• Preset #2 expects notes from a track of the Standard MIDI File. To choose the track go to the
Song Play mode, press the MENU button, touch the Preferences item, be sure the "General
Setup" page is selected, and choose a track from the "Harmony Control" parameter. (Usually,
harmony notes are contained in Track #5).
• Preset #3 is meant for use with an MP3 Song. Choose this preset when playing an MP3, and the
Pa3X will recognize chords by analyzing the file.
2
Press the HARMONY button in the control panel to turn its LED on.
3
Play some chords, to let the Voice Processor create new voices based on their notes.
Contrary to doubling, harmonizing adds chord notes, or counterpoint notes, to the note you
sing.
4
Sing along with the chords and melody you play on the keyboard.
5
Adjust the level of the harmony voices by using the HARMONY/DOUBLE knob in the
MIC SETTING section of the control panel.
6
While in the Mic panel, choose the various Voice Processor Presets to test the various
harmonization styles.
7
If it is playing, stop the Style.
8
Press the HARMONY button again, to turn its LED off.
Use these buttons to turn the
effect sections on/off
Singing with a microphone
Applying harmony to your voice
93