Specifying The Bonjour Settings - Konica Minolta bizhub C650 Print Operations

Setting up network printing

Specifying the Bonjour settings

When connecting this machine to a Macintosh computer using Bonjour/Rendezvous, the Bonjour settings
must be specified.
Note
The Bonjour connection is a Mac OS X 10.4 function, it is the same function as the Rendezvous
connection in Mac OS 10.3 or earlier.
1
Press the [Utility/Counter] key in this machine's control panel, touch [Administrator Settings], and then
enter the administrator password.
– The administrator password is required to enter Administrator mode. Ask the administrator of this
machine for the administrator password.
2
Touch [Network Settings], then [Bonjour Setting].
3
Specify settings for the following. After specifying the settings, touch [OK].
– Bonjour Setting: Select [ON].
– Bonjour Name: Specify the Bonjour name that is to appear as the connected device name (up to 63
characters).
4
To apply the settings, restart this machine (turn the main power off, then on again).
Reminder
When turning the power off, then on again, wait at least 10 seconds before turning the power on again;
otherwise, this machine may not function properly.
bizhub C650/C550/C451 (FE3)
4
4-33