Setting Up The System; To Set Up The Printing System - Konica Minolta bizhub C650 Print Operations

Overview
2.3

Setting up the system

In order to use this printing system, it must first be set up.
Setup consists of connecting this machine to a computer and installing the printer driver onto the computer
being used.

To set up the printing system

Setup of the printing system as described below.
1
Connect this machine to a computer. (Refer to "Compatible interfaces" on page 2-8.)
2
When using a network connection, set up the network. (Refer to "Setting up network printing" on
page 4-3.)
3
Install the printer driver. (Refer to "Installing the printer driver" on page 3-3.)
4
Check the setup by printing a test page. (Refer to "Test printing" on page 5-4.)
5
Install the screen fonts.
– The DVD contains the Latin TrueType fonts as screen fonts.
– Install the screen fonts after adding the operating system standard fonts.
– For details, refer to Help of the operating system.
– The DVD "ScreenFont" or "Screen Fonts" folder contains the screen fonts.
– The Macintosh fonts are compressed. Install the fonts after decompressing them.
Installation of the printer driver may differ depending on the connection method used with this machine in
addition to the operating system of the computer and the type of printer driver being used.
!
Detail
For details on connecting this machine to a computer, refer to "Compatible interfaces" on page 2-8.
Note
To update an existing printer driver, delete the existing printer driver first.
As necessary, set the interface timeout settings in the Utility mode on the control panel. For details, refer
to "Print settings in administrator mode" on page 12-32.
bizhub C650/C550/C451 (FE3)
2
2-9