Specifying A Custom Size - Konica Minolta bizhub C650 Print Operations

Setting up the PostScript driver (Windows)

Specifying a custom size

When printing on paper of a custom size, you can specify the paper size values by following the procedure
described below.
1
From the "Original Size" or the "Paper Size" drop-down list, select "Custom Size".
The Custom Size Settings dialog box appears.
2
Specify settings for the following:
– Width: Specifies the width of the custom paper size according to the selected measurement unit.
– Length: Specifies the length of the custom paper size according to the selected measurement unit.
– Unit: Selects the measurement unit that specifies the size.
3
Click the [OK] button.
Note
If using banner paper, specify the size of the banner paper in Custom Size. For details, refer to "Printing
on banner paper (bizhub C451 only)" on page 11-42.
Selecting the paper tray
You can specify the paper you want to use for printing by selecting the paper tray that contains the loaded
paper.
1
Click the Basic tab.
2
From the "Paper Tray" drop-down list, select the desired paper tray.
Note
If "Auto" is specified as the paper tray, you can select the paper type. If the paper tray setting is
changed to a setting other than "Auto", the paper type is fixed to its preregistered setting. Specify a
paper type by clicking the [Paper Settings for Each Tray] button. For details, refer to "Specifying the
paper type for a paper tray" on page 7-10.
bizhub C650/C550/C451 (FE3)
7
7-9