Basic Tab; Layout Tab; Finish Tab - Konica Minolta bizhub C650 Print Operations

6

Basic tab

Item
Original Orientation
Original Size
Paper Size
Zoom
Paper Tray
Paper Type
Output Method
[User Settings]
[Authentication/Account Track]
Copies
Collate
Offset
Paper Settings for Each Tray

Layout tab

Item
Combination
Rotate 180
Skip Blank Pages
Chapter
Print Type
Binding Direction
Binding Margin
Image Shift

Finish tab

Item
Staple
Saddle Stitch
Punch
Fold
Output Tray
Paper Arrangement
6-4
Function
Specifies the orientation of the original document.
Specifies the size of the original document.
Specifies the output paper size. Automatically enlarges or reduces when the Orig-
inal Size setting is changed.
Specifies the enlargement and reduction ratio.
Selects the paper tray for printing.
Selects the paper type for printing.
For non-conventional printing, selects special output methods such as "Secure
Print" or "Save in User Box".
Specifies the ID and password, or the file name and box number when performing
"Secure Print" or "Save in User Box".
Specifies the user name and password when performing user authentication, and
the department name and password when performing account track on this ma-
chine.
Specifies the number of copies to print.
Specifies whether to print multiple copies in sets.
When printing multiple copies, shifts the output position of each set.
Specifies the paper type for each paper tray.
Function
Prints multiple pages on one page, or prints one sheet of an original document di-
vided on multiple pages. Details can be specified by clicking the [Combination De-
tails] button.
Prints the image rotated 180°.
Does not print blank pages in the data.
Specifies the page to be printed on the front side.
Specifies duplex printing and booklet printing.
Specifies the binding position.
Specifies the binding margin. Click the [Binding Margin Settings] button to specify
the margin values.
Prints by shifting the entire print image. Click the [Image Shift Settings] button to
specify the image shift values.
Function
Specifies stapling.
Specifies to saddle stitch a printed document.
Specifies hole punching.
Specifies folding.
Specifies the tray where to output the printed pages.
Specifies the method for adjusting the binding position.
Setting up the PCL driver (Windows)
bizhub C650/C550/C451 (FE3)